搜索 Search
你的位置:首页 > 新闻资讯 > 行业新闻

三辊卷板机支撑爪与中心架的改善工作

点击:

  题记:三辊卷板机支撑爪与中心架的改善工作文章由waker供稿。主要讲述三辊卷板机的中心架支撑在合适的支撑面上,一端夹紧,另一端支撑。正式操作时,工件转动时,首先使下两个支撑爪均匀接触工件支撑面后锁紧全文紧扣三辊卷板机主题,大约1307字,预计阅读全文耗时6分钟。

1.三辊卷板机的中心架支撑在合适的支撑面上,一端夹紧,另一端支撑。正式操作时,工件转动时,首先使下两个支撑爪均匀接触工件支撑面后锁紧,然后紧紧紧固上盖,调整上支撑爪位置,直至锁紧妥当。

The center frame of the three-roller bending machine is supported on the appropriate support surface, one end is clamped, and the other end is supported. In formal operation, when the workpiece rotates, first make the next two supporting claws evenly contact the workpiece support surface and lock it, then tighten the upper cover tightly, adjust the position of the upper supporting claw until it is locked properly.


2.在这个过程中,一定要保证三辊卷板机中心架各支爪均匀发力,避免出现一些不良现象。在支撑最精确的工件表面时,为了防止支撑爪磨损工件表面,最好在支撑爪与中心架支撑面之间垫一层纯铜片或细砂布,这样情况会有所改善。

In this process, it is necessary to ensure that the center frame of the three-roller plate rolling machine each claw uniform force, to avoid some adverse phenomena. When supporting the most accurate workpiece surface, in order to prevent the support claw wear workpiece surface, it is best to pad a layer of pure copper sheet or fine emery cloth between the support claw and the center frame support surface, so that the situation will be improved.


最新资讯
推荐产品